The Extron
MVC 121 xi
is a compact, three source audio mixer featuring audio DSP for mixing and signal processing. The MVC 121 xi provides a stereo line level input and two mic/line level inputs with 48 volt phantom power for condenser microphones, plus fixed and variable stereo line level outputs. It offers gain, filters, bass and treble tone controls, along with parametric EQ. Quick and intuitive configuration of essential parameters is possible using the front panel controls or DSP Configurator Pro software. The MVC 121 xi is ideal for basic presentation applications that require line and microphone audio mixing with audio DSP in a small form factor.
MVC 121 xi
Provide a stereo audio mixer with a digital signal processing platform for audio signal mixing and control that shall support two mono analog inputs capable of microphone or line level signals, one stereo line level input, and two stereo line level outputs.
Three source, two output stereo audio mixer with digital signal processing
Input Requirements
Shall support two mono inputs, microphone or line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
Shall support one stereo line level input, balanced or unbalanced signal on one 6-pole, 3.5 mm captive screw connector
Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
Shall provide analog to digital conversion at 48 kHz sampling rate with 24-bit resolution
Output Requirements
Shall support one fixed stereo line level output, balanced or unbalanced signal on one 6-pole, 3.5 mm captive screw connector
Shall support one variable stereo line level, balanced or unbalanced signal on one 6-pole, 3.5 mm captive screw connector
Shall provide digital to analog conversion at 48 kHz sampling rate with 24-bit resolution
DSP Engine Requirements
Shall support mixing the two microphone/line level inputs, with the stereo line level input for output to dual stereo line level outputs
Shall provide audio digital signal processing on all inputs and outputs
Audio Device Requirements — Input to Output
Shall provide a signal-to-noise ratio greater than 100 dB measured from 20 Hz to 20 kHz, at maximum output, unweighted
Shall provide a THD+N measurement of less than 0.02% measured at 1 kHz, at maximum output level
Configuration Software Requirements
Shall provide PC-based DSP Configurator Pro software allowing flexible control of the unit’s digital signal processing tools, including mixing
Shall provide a Live mode for real-time control of parameters without compiling and file uploading to mixer
Shall provide an Emulate mode for offline configuration
Shall provide a single window view of all inputs and outputs, audio processing blocks, and mix points
Shall provide setup and configuration of digital audio processing tools including, but not limited to filters and gain stages
Shall provide cut/copy/paste of parameters between processing blocks
Shall provide integrated mix point gain adjustment between inputs and outputs
Shall provide Soft Limits settings to define upper and lower control limits for use with external controls
Shall provide real-time meters of levels within each Input Gain and Output Volume processing block in Live mode
Shall provide a Meter Bridge window for real-time metering of all input and output channels in Live mode
Shall provide keyboard-based navigation utilizing directional controls and keyboard shortcuts
Shall provide file saving in both Live and Emulate mode
Shall provide file upload in both Live and Emulate mode
Control Requirements
Shall support bidirectional RS-232 on one 3-pole, 3.5 mm captive screw connector
Shall support USB configuration on a female USB C connector
Shall support remote control operation via external control system using Simple Instruction Set commands sent over RS-232 on one 3-pole, 3.5 mm captive screw connector
Shall provide four digital input ports on one 6-pole, 3.5 mm captive screw connector for individual muting of each input by remote trigger
Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
Front Panel Requirements
Shall provide a green LED for power indication
Shall provide Configuration port on female USB C connector
Shall provide one rotary encoder knob and three select buttons for independent gain control over group masters
Shall provide an LED level indicator for displaying input gain, output volume settings, or output level metering
Rear Panel Requirements
Shall provide LEDs for phantom power indication
Shall provide two mono and one stereo inputs on two 6-pole, 3.5 mm captive screw connectors
Shall provide two stereo outputs on 3.5 mm captive screw connectors
Shall provide four digital input ports on one 6-pole 3.5 mm captive screw connector
Shall provide one bidirectional RS-232 port on one 3-pole 3.5 mm captive screw connector
General Requirements
Shall provide one Extron Everlast energy-efficient external universal power supply with 2-pole captive screw connector
Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 0.5 A, 6 watts
Shall support use of optional Extron ZipClip™ 100 mounting bracket
Shall be enclosed in a rack-mountable 1U, quarter rack width metal enclosure
Shall meet regulatory compliances
Shall meet safety compliances under CE, c-UL, and UL
Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
Shall comply with environmental requirements of RoHS and WEEE
Shall provide three year parts and labor warranty on MVC 121 xi unit
Shall provide seven year parts and labor warranty on Everlast power supply
MVC 121 xi
Provide a stereo audio mixer with a digital signal processing platform for audio signal mixing and control that shall support two mono analog inputs capable of microphone or line level signals, one stereo line level input, and two stereo line level outputs.
Three source, two output stereo audio mixer with digital signal processing
Input Requirements
Shall support two mono inputs, microphone or line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
Shall support one stereo line level input, balanced or unbalanced signal on one 6-pole, 3.5 mm captive screw connector
Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
Shall provide analog to digital conversion at 48 kHz sampling rate with 24-bit resolution
Output Requirements
Shall support one fixed stereo line level output, balanced or unbalanced signal on one 6-pole, 3.5 mm captive screw connector
Shall support one variable stereo line level, balanced or unbalanced signal on one 6-pole, 3.5 mm captive screw connector
Shall provide digital to analog conversion at 48 kHz sampling rate with 24-bit resolution
DSP Engine Requirements
Shall support mixing the two microphone/line level inputs, with the stereo line level input for output to dual stereo line level outputs
Shall provide audio digital signal processing on all inputs and outputs
Audio Device Requirements — Input to Output
Shall provide a signal-to-noise ratio greater than 100 dB measured from 20 Hz to 20 kHz, at maximum output, unweighted
Shall provide a THD+N measurement of less than 0.02% measured at 1 kHz, at maximum output level
Configuration Software Requirements
Shall provide PC-based DSP Configurator Pro software allowing flexible control of the unit’s digital signal processing tools, including mixing
Shall provide a Live mode for real-time control of parameters without compiling and file uploading to mixer
Shall provide an Emulate mode for offline configuration
Shall provide a single window view of all inputs and outputs, audio processing blocks, and mix points
Shall provide setup and configuration of digital audio processing tools including, but not limited to filters and gain stages
Shall provide cut/copy/paste of parameters between processing blocks
Shall provide integrated mix point gain adjustment between inputs and outputs
Shall provide Soft Limits settings to define upper and lower control limits for use with external controls
Shall provide real-time meters of levels within each Input Gain and Output Volume processing block in Live mode
Shall provide a Meter Bridge window for real-time metering of all input and output channels in Live mode
Shall provide keyboard-based navigation utilizing directional controls and keyboard shortcuts
Shall provide file saving in both Live and Emulate mode
Shall provide file upload in both Live and Emulate mode
Control Requirements
Shall support bidirectional RS-232 on one 3-pole, 3.5 mm captive screw connector
Shall support USB configuration on a female USB C connector
Shall support remote control operation via external control system using Simple Instruction Set commands sent over RS-232 on one 3-pole, 3.5 mm captive screw connector
Shall provide four digital input ports on one 6-pole, 3.5 mm captive screw connector for individual muting of each input by remote trigger
Shall support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
Front Panel Requirements
Shall provide a green LED for power indication
Shall provide Configuration port on female USB C connector
Shall provide one rotary encoder knob and three select buttons for independent gain control over group masters
Shall provide an LED level indicator for displaying input gain, output volume settings, or output level metering
Rear Panel Requirements
Shall provide LEDs for phantom power indication
Shall provide two mono and one stereo inputs on two 6-pole, 3.5 mm captive screw connectors
Shall provide two stereo outputs on 3.5 mm captive screw connectors
Shall provide four digital input ports on one 6-pole 3.5 mm captive screw connector
Shall provide one bidirectional RS-232 port on one 3-pole 3.5 mm captive screw connector
General Requirements
Shall provide one Extron Everlast energy-efficient external universal power supply with 2-pole captive screw connector
Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
Shall provide output of 12 VDC, 0.5 A, 6 watts
Shall support use of optional Extron ZipClip™ 100 mounting bracket
Shall be enclosed in a rack-mountable 1U, quarter rack width metal enclosure
Shall meet regulatory compliances
Shall meet safety compliances under CE, c-UL, and UL
Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
Shall comply with environmental requirements of RoHS and WEEE
Shall provide three year parts and labor warranty on MVC 121 xi unit
Shall provide seven year parts and labor warranty on Everlast power supply
Become an Extron Insider
If you are an Extron customer — a reseller, consultant, education professional, or AV technician — you are invited to become an Extron Insider for access to:
Product pricing information
Access to Extron Certification programs
Product availability status
Product and training videos
Design resources, including our Visio Library
Learn More
Create an Account
