相关文章推荐
# Beware! This script will be in /rom/etc/uci-defaults/ as part of the image.
# Uncomment lines to apply:
# wlan_name="OpenWrt"
# wlan_password="12345678"
# root_password=""
# lan_ip_address="192.168.1.1"
# pppoe_username=""
# pppoe_password=""
# log potential errors
exec >/tmp/setup.log 2>&1
if [ -n "$root_password" ]; then
  (echo "$root_password"; sleep 1; echo "$root_password") | passwd > /dev/null
# Configure LAN
# More options: https://openwrt.org/docs/guide-user/base-system/basic-networking
if [ -n "$lan_ip_address" ]; then
  uci set network.lan.ipaddr="$lan_ip_address"
  uci commit network
# Configure WLAN
# More options: https://openwrt.org/docs/guide-user/network/wifi/basic#wi-fi_interfaces
if [ -n "$wlan_name" -a -n "$wlan_password" -a ${#wlan_password} -ge 8 ]; then
  uci set wireless.@wifi-device[0].disabled='0'
  uci set wireless.@wifi-iface[0].disabled='0'
  uci set wireless.@wifi-iface[0].encryption='psk2'
  uci set wireless.@wifi-iface[0].ssid="$wlan_name"
  uci set wireless.@wifi-iface[0].key="$wlan_password"
  uci commit wireless
# Configure PPPoE
# More options: https://openwrt.org/docs/guide-user/network/wan/wan_interface_protocols#protocol_pppoe_ppp_over_ethernet
if [ -n "$pppoe_username" -a "$pppoe_password" ]; then
  uci set network.wan.proto=pppoe
  uci set network.wan.username="$pppoe_username"
  uci set network.wan.password="$pppoe_password"
  uci commit network
echo "All done!"
# 设置时区
uci set system.@system[0].zonename='Asia/Shanghai'
uci set system.@system[0].timezone='CST-8'
uci commit
# 设置软件源(清华源)
sed -i 's/downloads.openwrt.org/mirrors.tuna.tsinghua.edu.cn\/openwrt/g' /etc/opkg/distfeeds.conf

最后点击请求构建,等待官方镜像构建完毕,即可在下面下载到啦~

 
推荐文章