相关文章推荐
长情的山羊  ·  常見問題-創維– ...·  2 周前    · 
长情的山羊  ·  TL-50Q100 | 奇美家電·  2 周前    · 
长情的山羊  ·  [ROM][Android9.0][Rock ...·  2 周前    · 
长情的山羊  ·  android tv ...·  2 周前    · 

Hi @Lili :

Can you tell me the implication of this please: https://gitlab.com/rk-vendor/rk/rkbin/commit/6162d1b0326090177eccfeab448263947cf66596 ?

I’ve been having problems that feel memory related with one of my rock960C-4G described here and was wondering if it might be related: https://discuss.96boards.org/t/rock960-c-unhandled-exception-in-el3/8839

Thanks.

Rock Pi 4 is a RK3399 device and Tinkerboard is a RK3288.
It’s impossible to use the firmware on it as the flash tools will refuse to flash and it will also not boot from a micro-sd card on the Tinkerboard.

If both devices were RK3399 then it might have been possible after doing lots of changes.

eMMC 5.1 for ROCK PI 4 (also for ODroid)

ROCK PI 4 Accessory Storage media Available in 16GB/32GB/64GB or 128GB As well compatible to ODroid PLEASE NOTE: For your convenience please order as well the eMMC to uSD adapter board. It makes it easy to flash software images on to the eMMC...

Price: USD 11.95

USB3.1 to eMMC Reader/Writer

True blasting USB3.1 performance!! The perfect tool for flashing your software images with USB3.1 speed onto your eMMC module. High speed USB3.1 Gen2 GL3227E controller Write speed up to 150MB/s Dual mount for eMMC module Support eMMC HS400 mode...

Price: USD 7.99

eMMC to uSD board for ROCK PI 4

ROCK PI 4 Accessory eMMC to uSD (micro SD) adapter board for easily flashing software images on to eMMC modules. Best to use with "Etcher" flashing software.

Price: USD 1.95

Hi mo123,

Again, thanks a lot for this release - my parents have been using the small media center with this and it works like a charm.

I did encounter 1 thing I had a question about… I purchased a bluetooth “Q5” remote, and sometimes on shutdown/power-on, it will refuse to automatically connect (it looks like it does?) - so I have to connect a keyboard and re-pair the device.

I’ve looked up the issue, but the only thing I found was related to the nVidia Shield appliance. Apparently there’s an option “Bluetooth LE” which they can turn off to allow the remote to connect back without issues. I was wondering if it’s possible to do something similar to this build? Thanks very much.