I have recently posted a problem about an Error 303, which I have not cleared. However now when I start up Decoder Pro (with the Lenz software not running) the program starts up but the Data light on the 23151 is not on.
Can someone help?
I enclose a copy of the Help -> System Console screen if this assists.
2020-05-20 11:50:01,822 util.Log4JUtil INFO - ****** JMRI log ******* [main]
2020-05-20 11:50:01,869 util.Log4JUtil INFO - This log is appended to file: C:\Users\davek\JMRI\log\messages.log [main]
2020-05-20 11:50:01,869 util.Log4JUtil INFO - This log is stored in file: C:\Users\davek\JMRI\log\session.log [main]
2020-05-20 11:50:01,922 apps.AppsBase INFO - DecoderPro version 4.18+R37ad3d0 starts under Java 1.8.0_251 on Windows 10 x86 v10.0 at Wed May 20 11:50:01 BST 2020 [main]
2020-05-20 11:50:02,931 gui3.Apps3 INFO - Starting with profile My_JMRI_Railroad.3f149597 [main]
2020-05-20 11:50:04,291 node.NodeIdentity INFO - Using jmri-oXdd0dAHWhOiaapjuj2Xbb-3f149597 as the JMRI storage identity for profile id 3f149597 [AWT-EventQueue-0]
2020-05-20 11:50:04,713 xml.AbstractSerialConnectionConfigXml INFO - Starting to connect for "XpressNet" [main]
2020-05-20 11:50:05,916 liusb.LIUSBAdapter INFO - COM4 port opened at 57600 baud with DTR: true RTS: true DSR: false CTS: false CD: false [main]
2020-05-20 11:50:36,020 lenz.XNetInitializationManager WARN - Command Station disconnected, or powered down assuming LZ100/LZV100 V3.x [main]
2020-05-20 11:50:36,957 util.FileUtilSupport INFO - File path program: is C:\Program Files (x86)\JMRI\ [main]
2020-05-20 11:50:36,973 util.FileUtilSupport INFO - File path preference: is C:\Users\davek\JMRI\My_JMRI_Railroad\ [main]
2020-05-20 11:50:36,973 util.FileUtilSupport INFO - File path profile: is C:\Users\davek\JMRI\My_JMRI_Railroad\ [main]
2020-05-20 11:50:36,973 util.FileUtilSupport INFO - File path settings: is C:\Users\davek\JMRI\ [main]
2020-05-20 11:50:36,973 util.FileUtilSupport INFO - File path home: is C:\Users\davek\ [main]
2020-05-20 11:50:36,973 util.FileUtilSupport INFO - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main]
2020-05-20 11:50:41,035 jmrix.AbstractMRTrafficController WARN - Timeout on reply to message: 21 21 00 consecutive timeouts = 0 in liusb.LIUSBXNetPacketizer [liusb.LIUSBXNetPacketizer Transmit thread]
2020-05-20 11:51:16,094 jmrix.AbstractMRTrafficController WARN - Timeout on reply to message: 21 24 05 consecutive timeouts = 1 in liusb.LIUSBXNetPacketizer [liusb.LIUSBXNetPacketizer Transmit thread]
2020-05-20 11:55:03,161 throttle.PowerManagerButton ERROR - Unexpected state value: 8 [AWT-EventQueue-0]
2020-05-20 11:55:03,177 throttle.PowerManagerButton ERROR - Unexpected state value: 8 [AWT-EventQueue-0]
Dave Keeler
You have changed something in the Preferences, your previous System Console log showed this :
2020-05-18 15:23:04,018 util.Log4JUtil INFO - ****** JMRI log ******* [main]
2020-05-18 15:23:06,284 util.Log4JUtil INFO - This log is appended to file: C:\Users\davek\JMRI\log\messages.log [main]
2020-05-18 15:23:06,299 util.Log4JUtil INFO - This log is stored in file: C:\Users\davek\JMRI\log\session.log [main]
2020-05-18 15:23:06,753 apps.AppsBase INFO - DecoderPro version 4.18+R37ad3d0 starts under Java 1.8.0_251 on Windows 10 x86 v10.0 at Mon May 18 15:23:06 BST 2020 [main]
2020-05-18 15:23:16,284 gui3.Apps3 INFO - Starting with profile My_JMRI_Railroad.3f149597 [main]
2020-05-18 15:23:27,393 node.NodeIdentity INFO - Using jmri-oXdd0dAHWhOiaapjuj2Xbb-3f149597 as the JMRI storage identity for profile id 3f149597 [AWT-EventQueue-0]
2020-05-18 15:24:05,688 util.FileUtilSupport INFO - File path program: is C:\Program Files (x86)\JMRI\ [main]
2020-05-18 15:24:05,688 util.FileUtilSupport INFO - File path preference: is C:\Users\davek\JMRI\My_JMRI_Railroad\ [main]
2020-05-18 15:24:05,688 util.FileUtilSupport INFO - File path profile: is C:\Users\davek\JMRI\My_JMRI_Railroad\ [main]
2020-05-18 15:24:05,688 util.FileUtilSupport INFO - File path settings: is C:\Users\davek\JMRI\ [main]
2020-05-18 15:24:05,688 util.FileUtilSupport INFO - File path home: is C:\Users\davek\ [main]
2020-05-18 15:24:05,704 util.FileUtilSupport INFO - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main]
2020-05-18 15:24:48,975 jmrit.AbstractIdentify WARN - Requested operation not implemented in command station (303) readng CV 29, trying Paged mode [AWT-EventQueue-0]
2020-05-18 15:24:52,085 jmrit.AbstractIdentify WARN - Restoring Direct Byte mode [AWT-EventQueue-0]
2020-05-18 15:24:52,085 jmrit.AbstractIdentify WARN - Stopping due to error: Requested operation not implemented in command station (303) [AWT-EventQueue-0]
Your new log indicate you are now using the USB portion via COM4. When I look at Preferences for the 23151, Ethernet LAN, They state an IP address must be defined, there is no
mention of a USB COM port setup. So I assume PREFERENCES must have both the LI-USB and LI-USB/Ethernet setup (note: Li-USB connection uses: no flow control required for 23151)
So this 23151 talks to the computer via either EThernet IP or via the USB connection. Communication between the 23151 and your LENZ System is via XpresseNet connection to a LA152 or Direct to the command stations LMAB connections. This cable must have a flip to it: LMAB to BAML as per the LA152 manual.
Did you try using the LENZ provided software to confirm your setup to be operational ?
303 is a pretty clear error condition, but that it occurs on a CV29 read or during the switch between Direct and Page mode ?
Guess you must wait until Paul Bender shows up in here : - ) He is the person who wrote up the LENZ/ExpressNet stuff I believe.
Marc
Doing a search with 23151 in this forum comes up with a bunch of problem conditions encountered with the LENZ Li-USB/LAN 23151.
Some say it works better via IP and your previous log would tend to indicate same. Your new log using the USB connection is faulted. Not talking
to 23151 or not talking to the Lenz System via ExpressNet cable.
Check Windows 10 Device Manager and confirm the 23151 is in effect on COM4. It uses an FTDI driver and they are a 2 pass driver install. Your 23151 might be missing a portion.
Marc
On Wed, May 20, 2020 at 10:13 AM, <forfoum@...> wrote:
Did you try using the LENZ provided software to confirm your setup to be operational ?
Yes when the 23151 is running with the Lenz software the system status is shown as:
Lenz system version: 3.6 (LZ 100)
Interface-Version 1.1 Code number 0.1
Interface-COM 4
57600 Baud
Interface advice address: 22
Prg-Mode OFF
Start-Mode MUNUELL
Emerg-Off OFF
Emerg-Stop OFF
And the 23151 words as expected. If however you try to open the Decoder Pro with the Lenz software running to get the message that COM 4 is in use.
Dave
If you used the lenz software to program a decoders of yours, and it worked, then the problem is not hardware, not USB or Ehternet or ExpressNet, .
It is expected that when a COM port is in use by one program, it can not be shared with another, that is an "Expected".
So effectively you must stop the LENZ software before you run JMRI.
Your first provided log would tend to indicate you were using the Ethernet connection and from the indications it was talking with the Command Station.
Since I am not a LENZ user, I will step back from the table. Tried to help.
Marc
On May 20, 2020, at 7:06 AM, David Keeler via groups.io <dave.keeler@...> wrote:
I have recently posted a problem about an Error 303, which I have not cleared. However now when I start up Decoder Pro (with the Lenz software not running) the program starts up but the Data light on the 23151 is not on.
Can someone help?
One question: is flow control on or off?
For the LIUSB-Ethernet, flow control should be off. The device doesn’t support Flow Control.
From everything else you have posted, I suspect you have it on.
Paul
